Brentwood, NY 631-231-4500 Call Us Email Us

RSG

////RSG

RSG

Model RSG Slide Gate Operator

PowerMaster RSG Slide Gate Operator for use in Residential, Commercial, Industrial and Restricted Access applications for gates up to 14′ wide and 350 lbs. Use for up to 10 cycles per hour.

  • PSC motor
  • Timer to Close
  • Dual gate option
  • Left/Right changeover in field
  • NEMA 1 one-button control station
Cycles Per Hour10
Power Options115V, 1PH
Horsepower1/2
Max Gate Weight350lbs
Max Gate Width14ft
Battery BackupNO
Travel Speed12 inches/second
Shipping Weight
(approx.)		90lbs
RSG Line Drawing
Category:

Description

Resi Slide Gate Operator

Specifications & Features

  • PSC Motor
  • Available horse power: 1/2 HP
  • Power requirements: 115 Volts, 1 phase
  • Class II low voltage control circuit
  • Gate Capacity: 350 lbs, 14 feet wide, up to 10 cycles per hour
  • Travel Speed : 12 inches per second
  • UL 325 Listed for use in Class I through IV application.
  • Heavy duty #11 Ga. Galvanized steel frame providing a strong and durable unit
  • Hard shell baked-on weather resistant powder coating
  • Industrial V-belt primary reduction for smooth quiet operation.
  • #65 Sprocket and roller chain arrangement for final drive reduction
  • Oil impregnated brass bearings supporting output drive shaft, for dependable service with low maintenance
  • Heavy duty #41 roller chain driving gate
  • Easy pull and latch drive disconnect for manual operation in case of a power failure
  • Positive, chain driven rotary limit switches for precision gate positioning. Never affected by manual operation.
  • Post or pad mountable for easy installation
  • Nitro board with 4-line LCD display

External control input terminal connections for:

  • Radio Receiver
  • Push Button Control Station
  • Key Switches
  • Loop Detector
  • Card Key Readers
  • Telephone Entry Systems, Etc.

  • Timer to close with 0-60 sec. Adjustment standard (Longer timer available upon request).
  • Maximum run timer for equipment protection (self adjusting).
  • Dual gate option with dedicated terminal connection provided.
  • Easy Left/Right changeover.
  • Time delay on reverse to insure smooth gate motion and less stress on equipment.
  • Spike suppressing circuitry for surge and lightning protection.
  • Electrical dynamic brake for precise gate positioning.
  • Integral current sensing anti-entrapment circuitry with independent opening and closing sensitivity adjustment.
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors.
  • Internal On/Off power switch.
  • NEMA 1 three-button control station included.
  • Shipping weight: approx. 90 lbs
  • Shipping dimensions: 24″ x 16″ x 16″

Manual / Cut Sheet

Wiring Diagrams

Optional Equipment

  •  LED Light Kits

  • Radio Control
  • Safety Edge (contact safety sensor)
  • Photo Cell (non-contact safety sensor)
  • Loop Detectors
  • Card Key Reader

    • Interior and Exterior Control Stations:

  • Push Buttons
  • Push Button with Keyed Lockout
  • Key Switches
  • Three Second Advance Audio Warning Signal available upon request

Safety Options

Related products

  • SG

    Commercial Slide Gate Operator

  • D-SG

    Commercial Slide Gate Operator with DC Motor

  • CSG

    Vehicular Slide Gate Operator with DC motor

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

© Copyright VE Power Door | All Rights Reserved | This site designed and hosted by Enter.Net