Brentwood, NY 631-231-4500 Call Us Email Us


Commercial Slide Gate Operator with DC Motor

PowerMaster Model D-SG Slide Gate Operator with DC Motor is designed for use in commercial and industrial applications for gates up to 50ft wide and up to 2,000lbs. Use for up to 60 cycles per hour.

  • Battery Backup
  • 588 Watts (1/2hp equivalent), 24VDC Motor
  • AC Power Outlet
  • Nitro Board with 4-Line LCD Display
  • Built-in Radio Receiver
  • Soft Start/Soft Stop
  • Easy Set Limits
  • Heavy Duty Steel Frame with Polyethylene Rust and Dent Proof Cover


Cycles Per Hour60
Power Options115V, 1PH
Horsepower1/2HP Equivalent
Max Gate Weight2000lbs
Max Gate Width50ft
Battery BackupYES
Travel Speed9 inches/second
Shipping Weight
(with platform)
DSG Line Drawing


Commercial Slide Gate Operator
with DC Motor

Specifications & Features

  • Power requirements: 115V, 1 Phase
  • Available in 576 watts (1/2 HP equivalent)
  • Class II low voltage control circuit.
  • UL 325 Listed for use in Class I through IV application.
  • Pad-lockable option to secure cover for increased tamper proof protection
  • Polyethylene rust and dent proof cover
  • Built-in Radio Receiver
  • 3 slots for Plug-in Loop Detectors
  • Adjustable Closing Timer
  • Maximum Run Timer for equipment protection
  • Dual gate option with dedicated terminal connection provided
  • Easy Left/Right changeover
  • Spike suppressing circuitry for surge and lightning protection.

  • Magnetic gate lock circuitry with control relay
  • External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors
  • Internal On/Off power switch
  • 115 VAC, Convenience receptacle
  • NEMA 1 three-button control station included
  • Heavy duty #11 Ga. Galvanized steel frame providing a strong and durable unit.
  • 40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
  • Heavy duty #50 drive chain with a spring loaded tensioning system for smooth starts, stops, and reversals.
  • Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
  • Padlockable drive disconnect with brass slide for manual operation in case of power failure.
  • Positive chain driven rotary limit switches for precision gate positioning. Settings are never affected by manual operation.
  • Post or pad mountable for easy installation.

Manual / Cut Sheet

Wiring Diagrams

Optional Equipment

    • Safety Edge (contact safety sensor)
    • Photo Cell (non-contact safety sensor)
    • Push Buttons with Keyed Lockout
    • Loop Detector
    • Magnetic Gate Lock
    • Gear Box Heater (for cold climates)
    • Interior and Exterior Control Stations: Push Buttons, Push Button with Keyed Lockout, Key Switches

    Safety Options