Power options: 115V, 230V, 460V
Available horse power: 1/2 to 1.5 HP
Maximum gate weight: 1500 lbs
Maximum cycles per hour: 30 CPH
Maximum gate width: 50 feet
Gate speed: 9 inches per second
Class II low voltage control circuit
UL 325 Listed for use in Class I through IV application
Shipping weight: approx. 235 lbs
Shipping dimensions: 33″ x 17″ x 20″
Nitro board with 4-line LCD Display
Timer to close with 0-60 sec. Adjustment standard. Longer timer available upon request
Maximum run timer for equipment protection (self-adjusting)
Master/Slave option with dedicated terminal connection provided
Easy Left/Right changeover
Time delay on reverse to ensure smooth gate motion and less stress on equipment
Spike suppressing circuitry for surge and lightning protection
Emergency control enabling circuitry for safety with security
Electrical dynamic or solenoid brake for precise gate positioning
Magnetic gate lock circuitry with control relay
Integral, speed sensing, anti-entrapment circuitry with independent opening and closing sensitivity adjustment
External anti-entrapment circuitry with separate terminal connections for easy installation of contact and non-contact sensors
Internal On/Off power switch
NEMA 1 three-button control station included
Selectable three second advanced audio warning signal
Heavy duty #11 Ga. Galvanized steel frame providing a strong and durable unit.
40:1, oil bath type, gear reducer for long service and smooth, quiet operation.
Heavy duty #50 drive chain with a spring loaded tensioning system for smooth starts, stops, and reversals.
Heavy duty pillow block type ball bearings supporting output drive shaft and enabling extended endurance under heavy loads with low maintenance.
Padlockable drive disconnect with brass slide for manual operation in case of power failure.
Positive chain driven rotary limit switches for precision gate positioning. Settings are never affected by manual operation.
Post or pad mountable for easy installation.
External control input terminal connections for:- Radio Receiver
- Push Button Control Station
- Key Switches
- Loop Detectors
- Card Key Readers
- Telephone Entry Systems, Etc.
